

SQL/DB Error -- [You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '' at line 1]
SQL/DB Error -- [You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'and agree=1' at line 1]



Free Shippping in USA & Canada and Worldwide
* We pay up to $200 on International Shipping
5000 Water Ionizer for Alkaline or Acidic Water
This continuous flow model is designed for countertop applications and is designed with two built in pre-filters that total 12 stages of filtration.
- $200 Bonus Package
- Free Shipping in US and Canada
- We pay $200 towards shipping
- Free Carbon Pre-Filter (extends life of machine filters)
- Free Pre-Filter Housing
- We Pay State Sales Tax
- Produce strong anti-oxidant water - up to -850 mV *
- Highest pH production of any machine *
- Platinum coated titanium electrolysis plates
- Device has been designed and built with 12 steps of purification. (Patent obtained)
- Functions are activated or utilized easily by one-touch controls.
- LIFE ionizer analyzes the condition of the filter using its built-in sensor that utilizes digital circuitry.
- The filter condition is displayed at all times and a voice-supported warning message notifies users. (Patent obtained)
- Free Water Report (Typical Municipal Water Report)
Our LIFE Ionizers incorporate the patented PWM system.
This system controls the electric current level to be adjusted according to the temperature of the source water and the amount of the source water supplied to the system. So, detecting temperature of the source water and the amount of source water supplied to the system, the system adjusts the electric current level in order to produce the same quality of alkaline ionized water regardless of water temperature and amount of source water supplied to the machine.
* pH & ORP production are dependent upon water source
LIFE Ionizer 5000 Information and Specifications
| Water Ionizer | |
| Rated voltage | AC 110 V or 220V 50~60Hz |
| Water supply method | Direct link to tap water |
| Body (Size/weight) | 320x340x140(WxHxD)m/m / About 6.5Kg |
| Temperature available | 5C~35C |
| Water pressure available | 0.7~6.0kgf/ |
| Overheat-prevention device | Two built-in temperature sensors (auto reset) |
| Electrodes cell | |
| Electrolysis method | Continuous |
| Production Capacity |
.66 gak/min (at water pressure of 2kgf/) included alkaline water and acidic water |
| Electrolysis stage |
5 steps for alkaline water/ 2step for acidic water / 1 step purification |
| Electrolytic cleaning |
Auto washing (time: about 30 sec., amount of water used: about .21 gallons) |
| Electrode | Platinized titanium |
| Purification device | |
| Filter replacement | Cartridge method(2 stages) |
| Filter life |
The 1st for about 8 months, the 2nd for about 12 months (when 2.5 gallons of water is produced per day) |
| Life display | LCD text display |
| Filter material |
Nonwoven, pp filter, GAC, silver-added active carbon, calcium sulfite, block carbon, U/F membrane filter (Optional) |
| Creation capacity |
2.5 l/min. (at water pressure of 2kgf/)included alkaline water and acidic water |
| Electrolysis stage | 5 steps for alkaline water/ 2 step for acidic water |
| Operation indication | Sound and text display |
5 Year Warranty
LIFE Ionizers latest high technology systems are so well-built that we confidently offer a five year warranty – 3 years parts & labor and 2 years additional labor.
THE LIFE IONIZER
Minimizing cluster size of water molecules : Water molecules are unique due to the fact that one side of the molecule is positive charged and the opposite side is negative charged, therefore water molecules have a tendency to cluster like grapes on a vine. If the size of cluster is smaller, it means better performance on infiltrating into and detoxifying out of cells. Life Ionizers reduce the cluster size using the most advanced technology.
Anti-oxidant levels up to -851mV : The core part of the Life Ionizer is its patented electrolysis chamber. Life Ionizers succeeded in not only minimizing the cluster size of water to 50Hz but also in achieving high anti-oxidant power of -600 and up to -851mV. Reaching this level of ionization is accomplished by using our latest technological advancements and is dependent on your source water - if you have an acidic water to begin with and a high positive ORP, this will change your results.
Artificial intelligence sensor system : When the Life Ionizer is in washing or draining modes both voice-recorded and text-based messages are brought up on LCD screen. It also defends itself in case of electrical power surge or other situations involved with operation failure in electronic circuits. (patent obtained)
Dual Filters
Specially devised, high quality 6 Stage filters : Life Ionizers have the most comprehensive pre-filters available on the market today. Each unit has two built in filters totaling 12 stages of filtration/treatment.
| Description | ||
| Step | Name | Defination |
| 1 |
Pre Filter |
Relatively large contaminants such as sand, dirt, residue are removed prevents Special Block Carbon Filter from being contaminated |
| 2 |
Special block carbon filter |
Removes unpleasant tastes and odors, residual chlorine, environmental hormones which easily dissolves into water and trihalomethanes |
| 3 |
Poly-Ethylene Filter |
Removes microscopic and contaminated substances that could not be removed from the previous filtering process |
| 4 |
Active Carbon Filter |
Removes chlorine, deposits formed and floating in water, trihalomethanes (mixture of organics with chlorines), residual chlorine, and volatile organically combined substances. |
| 5 | CaSO3 H2O | Adds alkaline minerals |
| 6 |
Silver-Added Active Carbon |
Preserves the beneficial alkaline minerals and removes unpleasant taste and odor from water. |
LI 5000 : Countertop
- On-off ceramic valve integrated into the LI5000 body : A ceramic valve has been integrated into the body of the LI 5000 that allows users to turn the flow of water on and off easily. The valve is made from the most advanced ceramic materials. (patent obtained)
- pH levels subdivided into 8 different levels : Life Ionizer 5000 has 8 different pH levels; five levels of alkaline ion-water (pH 7.5, pH 8.5, pH 9.0, pH 9.5 and pH 10.0), The LIFE will attain 11.3 pH in city water & 12.5 in laboratory conditions. These results are dependent on your source water. two levels of acidic ion-water (pH 3.5, pH 5.5), and clean water. People using ionizers for the first time may experience varying degrees of detoxification and a decrease in alkalinity is recommended to allow the body to get used to consuming alkaline water. With 8 different pH settings, Life Ionizer 5000 has the perfect setting for you. (patent obtained)
- High Quality Construction : The highest quality component parts available are used on the LI 5000 from the sturdy alkaline-water connector on the top of the ionizer down to the custom stainless steel fittings on the bottom.
==========================================================
Up to 6 Gallons per minute $3,995
Up to 9 Gallons per minute $4,995

Commerical Applications
- New Systems
- Industrial Systems
- Municipal System
Advantages
- Arsenic removal up tp 50 PPB
- No regeneration required
- Highly Effiicent
- Environmentally Friendly
Technical Data
- Form supplied : Granules
- Size : 0.5-2 mm
- Color : Red brown
- Surface : 2600 sq. ft./ gram
- Bulk Density : 44 lbs per cu. Ft.
The maximum 50 PPB of arsenic in drinking water will be reduced to 10 PPB in 2006 by the United States Environmental Protection Agency, because of negative health effects. Arsenic enters the drinking water supply through pollution caused by industries and also occurs naturally.
ETWs ASR is a ferro hydroxide based arsenic adsorption media. It treats Arsenic III and V. The special production and drying procedure of the granulate makes it very robust and stable.
The media does not require backwashing, but it should be lifted periodically to avoid channeling. The media will not give any color or iron to the water. The night porosity allows for a large adsorption capacity. The adsorbed arsenic is transformed according to the following formula: Fe(OH)3 +H3As04 + 3 H20.
Even after the disposal of old media, no arsenic can be released into the environment. This product is very environmentally friendly and super economical.
Due to the high affectivity and competitive pricing of the media, its perfect for large industrial and commercial applications. The media doesnt require backwashing, but it should be lifted periodically to avoid channeling
The ARSENIC REMOVAL media is available in bulk for $150 per liter, with volume pricing available |
|
ABOUT ARSENIC : According to the US Environmental Protection Agency, “arsenic is a semi-metal element in the periodic table. It is odorless and tasteless. It enters drinking water supplies from natural deposits in the earth or from agricultural and industrial practices. Non-cancer effects can include thickening and discoloration of the skin, stomach pain, nausea, vomiting; diarrhea; numbness in hands and feet; partial paralysis; and blindness. Arsenic has been linked to cancer of the bladder, lungs, skin, kidney, nasal passages, liver and prostate.
EPA has set the arsenic standard for drinking water at .010 parts per million (10 parts per billion) to protect consumers served by public water systems from the effects of long-term, chronic exposure to arsenic.” EPA is considering lowering the standard to 5 parts per billion.If your water comes from a municipal or privately-owned water company that has more than 15 service connections or serves 25 people more than 6 months of a year, they are already testing for arsenic in your water. If you own your own, individual well, you are responsible for testing it. We offer laboratory-testing services for reasonable rates with a highly qualified independent laboratory. The USGS has created the following map showing the level of arsenic in various parts of the country but your specific location may be different

Our Arsenic media is extremely selective for arsenic and will typically reduce arsenic concentrations to below detectable limits of 1 ppb. The patent-pending media has very fast kinetics and low-pressure loss and is ANSI/NSF 61 certified.
ABOUT ARSENIC SELECTIVE MEDIAS : Typically in our competitor’s systems arsenic is removed by adding iron or aluminum based coagulants that form large particles (precipitate). The newly formed particulate is filtered out by a variety of methods.
Another popular method used by the competition is a strong base anion resin. In these systems the selectivity for arsenic is lower than the selectivity for sulfate. When sulfate is present (as in almost every potable water supply) and the system is overrun, the sulfate will displace arsenate from the resin and arsenate will appear in the effluent at higher concentrations than in the inlet. This effect is often referred to as “dumping” or chromatographic peaking.
Our media is made up of spherical, gel coated iron particles that have been specifically designed with a large amount of void space between beads leading to very low pressure loss, typically less than 5 psi. Arsenate ions exchanged into our media first enter the gel coating. The arsenic is exposed to and immobilized by the iron and immediately precipitates onto the iron, thus leaving the resin free to react with more arsenic while the iron boung arsenic remains trapped inside. The media will also remove anions such as nitrates, uranium and chromate. The media operates in waters with a pH range of six (6) to nine (9).
GUIDELINES FOR FEED WATER QUALITY
| Standard | Potable Guidelines | Operating Range of Media |
| Conductivity | 2,000 micromhos/cm | 4,000 micromhos/mc |
| Chloride | 500 ppm | 1,000 ppm |
| Sulfate | 500 ppm | 1,000 ppm |
| PH | 6.0 to 9.0 | 4.0 to 8.0 |
| Turbidity | 5 NTU | 5 NTU |
| Chlorine (free) | 0.05 ppm | 0.05 ppm |
SYSTEM CONFIGURATION :
We offer a one tank and two-tank design. The USEPA guidelines recommend a two-tank configuration. We strongly recommend the two tanks configuration to provide system redundancy. In the event that the first tank reaches capacity, the fresh media in tank number two will take over. Each tank has an approximate capacity of 900,000 gallons at 35 ppb of arsenic. When capacity is reached, new media is needed ($750 per tank for media). The various tank size options and exterior finishes are shown below :
| The various system are priced at : Single Tank up tp 6 gpm = $1,995 Single Tank up to 10 gpm = $2,495 Dual Tanks up to 6 gpm = $3,495 Dual Tanks up to 10 gpm = $4,495 |
![]() |







